麻豆社国产

Skip to content

Seed destructors gain ground among producers

Attaching a hammer mill to a combine is catching on in Australia, but North American farmers have been more cautious Nine hundred to 1,000 new combines are sold every year in Australia, according to the Tractor and Machinery Association of Australia.
seed-destructors
Redekop manufactures a harvest seed control unit that crushes weed seeds before they exit the combine. Sales are picking up in North America, but many growers want more data on the economic and agronomic benefits of the seed mills

Attaching a hammer mill to a combine is catching on in Australia, but North American farmers have been more cautious

Nine hundred to 1,000 new combines are sold every year in Australia, according to the Tractor and Machinery Association of Australia.

Of those new combines, 25 to 30 per cent come equipped with weed seed destructors.

“It’s taken off to the level where … there’s a few hundred being sold (with seed destructors) every year in Australia,” said Trevor Thiessen, president of Redekop Manufacturing, a farm equipment manufacturer in Saskatoon.

“Selling 200 to 300 mills is … a pretty good chunk of the new combine sales.”

Redekop manufactures a seed control unit that pulverizes weed seeds before they exit the combine in the chaff.

Weed seed destructors can potentially crush 90 to 95 percent of the weed seeds that go through the combine, thus reducing the number of viable seeds that could become weeds in future years.

“(They) work really well for weeds that have a high seed retention at harvest,” said Kim Brown-Livingston, weed specialist with Manitoba Agriculture.

“It’s basically a hammer mill on the end of your combine.”

Many Australian farmers were essentially forced to adopt the technology because they ran out of options to manage herbicide-resistant weeds.

In North America, thousands of farmers are struggling with kochia, waterhemp, palmer amaranth and other weeds that are resistant to multiple herbicides. For some, those weeds have become a major headache, while on other farms they are hindering crop yields.

However, only a small percentage of growers are investing in weed seed destructors.

“In the North American market, I would say we’re still in the discovery and understanding phase,” Thiessen said.

“The early adopters are putting it on (used combines).”

Most of the sales are retrofits for combines that are several years old. Anything older than 2012 may not have sufficient horsepower or capacity to operate the destructor.

While most farmers are still hesitant, there are geographic pockets in Canada and the United States where seed mills are gaining traction.

“Last year, it was a little more (sales) in the States, but we sold quite a few in Canada on all brands — John Deere, Case, New Holland,” Thiessen said.

“Most of our (Canadian) sales are coming from the Alberta-Saskatchewan border area, where the kochia problem is really bad and getting worse … a typical scenario in Western Canada. A guy has three or four combines (and) he’ll put a mill on one or two of them and run those (combines) in the toughest and weediest fields.”

Weed seed destructors are also getting a foothold in the Pacific Northwest, where the market is moving past the “early adopter stage,” Thiessen said.

Farmers In the U.S. Midwest and other regions may not be aware of seed mills or are skeptical about the return on investment. They’re sitting on the sidelines because the seed mills are not cheap. The Redekop unit costs around C$100,000.

Redekop has been collaborating with a group called Getting Rid of Weeds (GROW) to generate the agronomic and economic data on weed seed destructors.

It is a U.S. partnership between university researchers, agronomists and economist studying integrated weed management strategies.

One of the partners is Iowa State University, where weed scientists have been testing a Redekop seed destructor on a John Deere combine.

“Farmers in central Iowa and in Harrison County are already using this technology, and we expect more will do so in the coming years,” said Prashant Jha, professor and extension weed specialist at Iowa State.

Overall, Redekop has done trials with 12 universities in the U.S.

In most situations, a local producer will use a combine with a Redekop seed destructor and will run strip trials on their farm. The scientists then collect the data, to understand the impact on the weed seed bank.

“They’re also doing some static counts in the lab to validate kill rates and efficacy of the mill systems,” Thiessen said.

“We’re hoping by the end of this 2023 season, we’ll see some data out of that university research, which will help answer some questions for the farmer.”

Thiessen added that seed destructors will not fix the herbicide-resistant weed problem in North America. Instead, they are part of the solution.

“This is not a silver bullet…. When used in combination with good chemical rotation, and/or crop rotation, this will help reduce the weed pressure.”

 

push icon
Be the first to read breaking stories. Enable push notifications on your device. Disable anytime.
No thanks